Rustins Multi-Purpose Floor Finish 1L
Rustins Multi-Purpose Floor Finish
Apply on laminate, pre-coated veneered and wood floors, where minimum preparation is required. Quick drying, low odour, completely clear and non-yellowing. Very hard wearing. Touch dry in 20 minutes and re-coatable in 2 hours. Available in Satin finish. Can be used on stone, concrete and Plaster of Paris.
The floor must be clean and free of wax, grease or dust. If the floor has been wax polished, the wax should be removed with steel wool and white spirit, wiping off the floor while still damp with a clean rag or paper towel.
No sanding required on laminate or pre-coated veneered flooring. Sand new wood before applying finish. New concrete must be at least 7 days old.
To apply, stir well before and during use. Do not dilute. Apply liberally with minimum of brushing with large synthetic fibre brush or roller. For wood, finish in the direction of the grain. If using a roller do not roll to fast as this will cause air bubble in the coating.
|Coverage per litre||
14m² laminate / 10-12m² wood